| Markenname: | PM |
|---|---|
| Min Bestellmenge: | 10 |
| Lieferzeit: | 1-25 Arbeitstage |
| Zahlungsbedingungen: | T/T |
| Versorgungsmaterial-Fähigkeit: | 1000000pcs/month |
| Durchmesser: | 2-42mm | Länge: | Örtlich festgelegte Länge |
|---|---|---|---|
| Co%: | 12% | HRA: | 92,4 |
| Härte HV30: | 1740 | Dichte: | 14,1 |
| Material: | Hartmetall | ||
| Markieren: | Karbid 100% Rod Blanks,Bohrstange des Karbid-92.4HRA,Karbid Rod Blanks 92.4HRA |
||
Hartmetall-Schleifen regelte Länge Rod für Ende-Prägewerkzeuge
Unsere Stangen haben unterschiedlichen Grad und Recht, auf unterschiedlicher Anwendung zu verwenden; Besonders sind wir Erzeugnis das Nano-Kornkarbid (Grain<0.2µm); Unsere Stangen sind mit hoher Härte und tragen,/Korrosionsbeständigkeit, alle Produkte mit stabiler Qualität;
L Maß: Durchmesser von 3-42mm, Länge 310/330mm;
L verwenden für das Endmahlen
L Schleifen bei der Toleranz h5/h4
Grad-Informationen
| Grad | Co% | Korngröße von WC | Härte |
Härte |
Dichte | Biegefestigkeit | Bruch Härte |
Elastisches Umb. ulus | Koeffizient vom Thermal Expansion |
| HRA | Hochspg30 | g-/cm³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
| ST25F | 12 | Ultra-fein | 92,4 | 1740 | 14,1 | 5100 | 10 | 470 | 5,7 |
| Durchmesser | Länge | |||||||
| D (Millimeter) | Toleranz | L (Millimeter) | ||||||
| 3,0 | h5/h4 | 40 | ||||||
| 3,0 | h5/h4 | 50 | ||||||
| 3,0 | h5/h4 | 52 | ||||||
| 3,0 | h5/h4 | 75 | ||||||
| 3,0 | h5/h4 | 100 | ||||||
| 4,0 | h5/h4 | 50 | ||||||
| 4,0 | h5/h4 | 60 | ||||||
| 4,0 | h5/h4 | 75 | ||||||
| 4,0 | h5/h4 | 100 | ||||||
| 5,0 | h5/h4 | 50 | ||||||
| 5,0 | h5/h4 | 51 | ||||||
| 5,0 | h5/h4 | 60 | ||||||
| 5,0 | h5/h4 | 75 | ||||||
| 5,0 | h5/h4 | 100 | ||||||
| 6,0 | h5/h4 | 50 | ||||||
| 6,0 | h5/h4 | 51 | ||||||
| 6,0 | h5/h4 | 55 | ||||||
| 6,0 | h5/h4 | 60 | ||||||
| 6,0 | h5/h4 | 63 | ||||||
| 6,0 | h5/h4 | 75 | ||||||
| 6,0 | h5/h4 | 80 | ||||||
| 6,0 | h5/h4 | 100 | ||||||
| 6,0 | h5/h4 | 150 | ||||||
| 8,0 | h5/h4 | 60 | ||||||
| 8,0 | h5/h4 | 64 | ||||||
| 8,0 | h5/h4 | 75 | ||||||
| 8,0 | h5/h4 | 80 | ||||||
| 8,0 | h5/h4 | 100 | ||||||
| 8,0 | h5/h4 | 150 | ||||||
| 10,0 | h5/h4 | 67 | ||||||
| 10,0 | h5/h4 | 73 | ||||||
| 10,0 | h5/h4 | 75 | ||||||
| 10,0 | h5/h4 | 100 | ||||||
| 10,0 | h5/h4 | 150 | ||||||
| 12,0 | h5/h4 | 74 | ||||||
| 12,0 | h5/h4 | 75 | ||||||
| 12,0 | h5/h4 | 84 | ||||||
| 12,0 | h5/h4 | 100 | ||||||
| 12,0 | h5/h4 | 150 | ||||||
| 14,0 | h5/h4 | 84 | ||||||
| 14,0 | h5/h4 | 100 | ||||||
| 14,0 | h5/h4 | 101 | ||||||
| 14,0 | h5/h4 | 150 | ||||||
| 16,0 | h5/h4 | 83 | ||||||
| 16,0 | h5/h4 | 92,3 | ||||||
| 16,0 | h5/h4 | 100 | ||||||
| 16,0 | h5/h4 | 150 | ||||||
| 16,0 | h5/h4 | 93,3 | ||||||
| 18,0 | h5/h4 | 100 | ||||||
| 18,0 | h5/h4 | 150 | ||||||
| 20,0 | h5/h4 | 93,3 | ||||||
| 20,0 | h5/h4 | 100 | ||||||
| 20,0 | h5/h4 | 105,3 | ||||||
| 20,0 | h5/h4 | 150 | ||||||
