| Markenname: | PM |
|---|---|
| Min Bestellmenge: | 10 |
| Lieferzeit: | 1-25 Arbeitstage |
| Zahlungsbedingungen: | T/T |
| Versorgungsmaterial-Fähigkeit: | 1000000pcs/month |
| Durchmesser: | 2-42mm | Länge: | 310/330mm |
|---|---|---|---|
| Co%: | 12% | HRA: | 92,4 |
| Härte HV30: | 1740 | Dichte: | 14,1 |
| Material: | Karbid | ||
| Hervorheben: | Hohes Härte-Hartmetall Rod,P.M.-Hartmetall Rod,Wolframlegierungsstange |
||
Wolfram zementierte hohe Härte-Boden-Karbid-Stangen H5
Unsere Stangen haben unterschiedlichen Grad und Recht, auf unterschiedlicher Anwendung zu verwenden; Besonders sind wir Erzeugnis das Nano-Kornkarbid (Grain<0.2µm); Unsere Stangen sind mit hoher Härte und tragen,/Korrosionsbeständigkeit, alle Produkte mit stabiler Qualität;
L Maß: Durchmesser von 2-42mm, Länge 310/330mm;
L verwenden für das Endmahlen
L Schleifen bei der Toleranz h6/h5
Grad-Informationen
| Grad | Co% | Korngröße von WC | Härte |
Härte |
Dichte | Biegefestigkeit | Bruch Härte |
Elastisches Umb. ulus | Koeffizient vom Thermal Expansion |
| HRA | Hochspg30 | g-/cm³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
| ST25F | 9 | Ultra-fein | 92,4 | 1740 | 14,1 | 5100 | 10 | 470 | 5,7 |
| Durchmesser | Länge | ||||||||
| D (Millimeter) | Toleranz | L (Millimeter) | Toleranz | ||||||
| 3,0 | +0.2~+0.4 | 40 | +0.5~+1.0 | ||||||
| 3,0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
| 3,0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
| 3,0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
| 4,0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
| 4,0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
| 4,0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
| 4,0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
| 5,0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
| 5,0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
| 5,0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
| 5,0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 80 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
| 6,0 | +0.2~+0.4 | 150 | +0.5~+1.0 | ||||||
| 8,0 | +0.3~+0.55 | 60 | +0.5~+1.0 | ||||||
| 8,0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
| 8,0 | +0.3~+0.55 | 80 | +0.5~+1.0 | ||||||
| 8,0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
| 8,0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
| 10,0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
| 10,0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
| 10,0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
| 12,0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
| 12,0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
| 12,0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
| 14,0 | +0.3~+0.65 | 100 | +0.5~+1.0 | ||||||
| 14,0 | +0.3~+0.65 | 150 | +0.5~+1.0 | ||||||
| 16,0 | +0.3~+0.65 | 92 | +0.5~+1.0 | ||||||
| 16,0 | +0.3~+0.65 | 100 | +0.5~+1.0 | ||||||
| 16,0 | +0.3~+0.65 | 150 | +0.5~+1.0 | ||||||
| 18,0 | +0.4~+0.8 | 100 | +0.5~+1.0 | ||||||
| 18,0 | +0.4~+0.8 | 150 | +0.5~+1.0 | ||||||
| 20,0 | +0.4~+0.8 | 100 | +0.5~+1.0 | ||||||
| 20,0 | +0.4~+0.8 | 150 | +0.5~+1.0 | ||||||
