Durchmesser: | 6-20mm | Länge: | 330mm |
---|---|---|---|
Co%: | 9% | HRA: | 91,2 |
Härte HV30: | 1520 | Dichte: | 14,4 |
Material: | Hartmetall | Schleifen: | h6 |
Markieren: | 330mm Hartmetall Rod,Hartmetall Rod 91.2HRA,Hartmetall-Schleifen Rod |
Hartmetall hexil 30° Schleifen Rod-Länge 330mm für Bohrgeräte
Unsere Stangen haben unterschiedlichen Grad und Recht, auf unterschiedlicher Anwendung zu verwenden; Besonders sind wir Erzeugnis das Nano-Kornkarbid (Grain<0.2µm); Unsere Stangen sind mit hoher Härte und tragen,/Korrosionsbeständigkeit, alle Produkte mit stabiler Qualität;
Grad-Informationen
Grad | Co% | Korngröße von WC | Härte |
Härte |
Dichte | Biegefestigkeit | Bruch Härte |
Elastisches Umb. ulus | Koeffizient vom Thermal Expansion |
HRA | Hochspg30 | g-/cm³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
ST15D | 9 | Submikron | 91,2 | 1520 | 14,4 | 3500 | 13 | 500 | 5,3 |
D (Millimeter) | Toleranz | L (Millimeter) | Toleranz | TK (Millimeter) | Toleranz | d (Millimeter) | Toleranz | P (±0.5o) |
amax (Millimeter) |
6,0 | h6 | 330 | +0/+5 | 1,90 | +0/-0.20 | 0,70 | ±0.10 | 32,65 -0.65/+0.67 | 0,15 |
6,0 | h6 | 330 | +0/+5 | 2,60 | +0/-0.40 | 0,70 | ±0.10 | 32,65 -0.65/+0.67 | 0,15 |
7,0 | h6 | 330 | +0/+5 | 3,70 | +0/-0.40 | 1,00 | ±0.15 | 38,09 -0.76/+0.78 | 0,15 |
8,0 | h6 | 330 | +0/+5 | 3,30 | +0/-0.40 | 1,00 | ±0.15 | 43,53 -0.86/+0.89 | 0,15 |
8,0 | h6 | 330 | +0/+5 | 4,00 | +0/-0.40 | 1,00 | ±0.15 | 43,53 -0.86/+0.89 | 0,15 |
9,0 | h6 | 330 | +0/+5 | 4,80 | +0/-0.60 | 1,40 | ±0.15 | 48,97 -0.97/+1.00 | 0,20 |
10,0 | h6 | 330 | +0/+5 | 2,70 | +0/-0.40 | 0,80 | ±0.10 | 54,41 -1.08/+1.11 | 0,20 |
10,0 | h6 | 330 | +0/+5 | 4,80 | +0/-0.60 | 1,40 | ±0.15 | 54,41 -1.08/+1.11 | 0,20 |
11,0 | h6 | 330 | +0/+5 | 5,30 | +0/-0.80 | 1,40 | ±0.15 | 59,86 -1.19/+1.22 | 0,28 |
12,0 | h6 | 330 | +0/+5 | 3,70 | +0/-0.40 | 1,00 | ±0.15 | 65,30 -1.30/+1.34 | 0,30 |
12,0 | h6 | 330 | +0/+5 | 5,40 | +0/-0.60 | 1,50 | ±0.15 | 65,30 -1.30/+1.34 | 0,30 |
12,0 | h6 | 330 | +0/+5 | 6,25 | +0/-0.80 | 1,40 | ±0.15 | 65,30 -1.30/+1.34 | 0,30 |
13,0 | h6 | 330 | +0/+5 | 6,50 | +0/-0.80 | 1,75 | ±0.20 | 70,74 -1.40/+1.45 | 0,34 |
14,0 | h6 | 330 | +0/+5 | 4,80 | +0/-0.60 | 1,30 | ±0.15 | 76,18 -1.51/+1.56 | 0,37 |
14,0 | h6 | 330 | +0/+5 | 6,00 | +0/-0.60 | 1,60 | ±0.20 | 76,18 -1.51/+1.56 | 0,37 |
14,0 | h6 | 330 | +0/+5 | 7,10 | +0/-0.80 | 1,75 | ±0.20 | 76,18 -1.51/+1.56 | 0,37 |
15,0 | h6 | 330 | +0/+5 | 7,70 | +0/-0.80 | 1,75 | ±0.20 | 81,62 -1.62/+1.67 | 0,40 |
16,0 | h6 | 330 | +0/+5 | 4,90 | +0/-0.60 | 1,40 | ±0.15 | 87,06 -1.73/+1.78 | 0,40 |
16,0 | h6 | 330 | +0/+5 | 5,70 | +0/-0.60 | 1,50 | ±0.15 | 87,06 -1.73/+1.78 | 0,40 |
16,0 | h6 | 330 | +0/+5 | 8,30 | +0/-0.80 | 1,75 | ±0.20 | 87,06 -1.73/+1.78 | 0,40 |
17,0 | h6 | 330 | +0/+5 | 8,90 | +0/-0.80 | 1,75 | ±0.20 | 92,50 -1.84/+1.89 | 0,47 |
18,0 | h6 | 330 | +0/+5 | 6,30 | +0/-0.80 | 1,70 | ±0.20 | 97,95 -1.94/+2.00 | 0,50 |
18,0 | h6 | 330 | +0/+5 | 9,55 | +0/-0.80 | 2,00 | ±0.25 | 97,95 -1.94/+2.00 | 0,50 |
19,0 | h6 | 330 | +0/+5 | 10,10 | +0/-0.80 | 2,00 | ±0.25 | 103,39 -2.05/+2.12 | 0,50 |
20,0 | h6 | 330 | +0/+5 | 6,00 | +0/-0.60 | 1,00 | ±0.15 | 108,83 -2.16/+2.23 | 0,50 |
20,0 | h6 | 330 | +0/+5 | 10,40 | +0/-1.00 | 2,00 | ±0.25 | 108,83 -2.16/+2.23 | 0,50 |